![]() ![]() Take the light out orange cable and stick it back into the head unit MOST connector. If you mix one of these up the radio will not work. You can see all of the MOST connectors have little arrows that show which side is light in or light out. I lost the cover for the junction box so I electrical taped over the junction. Take the light in cable that you removed from the head unit harness with the orange wire leading into the box and use the included junction box to join them together. Pull out both of the MOST cables from the connector. Take one side of the orange MOST wires that came with the box and push out the little blue holder in the center of the connector. ![]() Remove the MOST connector from the head unit harness and remove the light in wire which is the one with the black shielding on it. To connect the box to the car we are going to tap into the MOST circuit coming into the head unit. The main connector on the head unit has a tab on the top you push down and pull pack to remove. Remove the two Philips head screws under the radio and pull out the head unit from the dash. Remove the two connectors from the climate controls. Take your plastic trim tool and pry the climate controls away from the dash. Laptop with NCSExpert (For cars without factory CD Changer)Ĭoding Cable (For cars without factory CD Changer) Installation will vary slightly between head units. This box is compatible with idrive or Professional head units only. ![]() This was done on a 06 330i with the professional head unit, Hands fee phone and Logic 7. If you can install an aftermarket head unit and install Windows from scratch you should be able to do this DIY. This install requires computer skills and knowledge of how MOST works. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |